A SERVICE OF

logo

Getting Set Up
2
User Manual
2-9
3.
Make sure that the left and right alignment pins fit in the holes in
the base of the printer.
4.
Plug the Lower Paper Tray Assembly cable into the printer.
To move the printer more than a few feet, it is easier to disconnect the Lower
Paper Tray Assembly and move the printer separately from the Lower Paper
Tray Assembly.
Caution
To avoid damaging the printer, let the printer cool down for at
least 30 minutes before you move it so that the ink has time to
solidify.
9101-02
4
2
2
3