Troubleshooting
6
User Manual
6-19
Windows 3.1 users
Note
Only use the following procedure if your computer is connected to
the printer through the parallel port or the optional serial port.
1. From the Control Panel, double-click Printers.
2. In the Printers dialog box, select the Tektronix Phaser 350 printer,
(or Tektronix Phaser 350 600x300 if you have the printer’s
Extended Features option) then click Setup. A dialog box appears
with the printer’s name across the top.
3. Click the PostScript tab.
4. In the Performance Options field, select the Use PostScript
Level 2 Features option.
5. Click the Job Control tab.
6. For better performance, select the Binary Mode option.
7. From your application, choose the Tektronix Phaser 350 as
your printer.
8. Try printing the document again.
