Getting Set Up
2
User Manual
2-39
Setting up the Tektronix driver for Windows 3.1
Packaged with your printer is a Tektronix Printer Driver for Windows 3.1
floppy diskette. This diskette contains a customized version of the Microsoft
printer driver, version 3.58.
1.
Start Windows, if it isn’t already running.
2.
Insert the Tektronix Printer Driver for Windows 3.1 diskette into your
computer’s disk drive.
3.
Open the Control Panel and double-click on the Printers icon; the
Printers dialog box appears.
4.
Click the Add>> button.
5.
In the List of Printers, select Install Unlisted or Updated Printer.
6.
Click the Install button.
7.
Type in the drive containing the printer’s diskette, for example, A:,
and click OK.
8.
Select your printer, then click OK. The driver software you need is
automatically installed.
■ Select Tek Phaser 350 (TekColor) if you have the standard version
of the printer.
■ Select Tek Phaser 350 (TekColor) Ext if you have the printer’s
Extended Features option.
Note
If you are not sure which configuration of the printer you have,
the printer’s startup page lists this information under Extended
Features: Yes/No. You can print a copy of the startup page from
the printer’s front panel.
Note
If you see a message that the driver is currently being used and
cannot be updated, exit all programs, restart Windows, and try
installing the printer again.
