Getting Set Up
2
User Manual
2-43
Setting up the Adobe PostScript driver for Windows 3.1
Note
The files for this driver are available on the printer’s CD-ROM
and on the AdobePS 3 Driver diskette.
If you already have the driver installed and you are only adding
the Phaser 350 printer, open the Control Panel, double-click the
Adobe driver icon, then continue with Step 5.
If you already have the driver installed and you want to add a
printer other than the Phaser 350 printer, open the Control
Panel, double-click the Adobe driver icon, then continue with
Step 5. Printer PPD files are located in the \WIN95_NT
directory on the printer’s CD-ROM only.
1.
Insert the printer’s CD-ROM into your CD-ROM drive, or insert
the AdobePS 3 Driver diskette into your disk drive.
2.
In the Program Manager in Windows 3.1, select Run from the
File menu.
3.
At the Command Line, do one of the following:
■ CD-ROM: Type in the drive the CD-ROM is in, followed by the
\ADOBEPS3 directory and the file name SETUP.EXE, and click OK.
For example:
C:\ADOBEPS3\SETUP
■ Diskette: Type in the drive the diskette is in, followed by the file
name SETUP.EXE, and click OK. For example:
A:SETUP
4.
When the README.WRI dialog box appears, select one of the
buttons as desired.
5.
In the PostScript Printer Driver Setup dialog box, click Continue
to begin the driver installation. This installer overwrites older
versions of the Adobe PostScript driver.
