Supplies, Accessories, and Expanding your System
8
User Manual
8-7
Memory upgrade
The Phaser 350 printer has 8 Mbytes of standard memory. You can upgrade
the printer to the Extended Features option which includes 24-Mbytes of
memory, 600 x 300 dpi printing, job collation, 52 additional fonts, check print
and job pipelining. To upgrade, order the Z350FX upgrade. Refer to
“Extended Features upgrade” on page 8-4 for more information.
Note The startup page reports how much RAM memory is installed in
the printer. You can use the startup page to determine the
amount of memory in the printer. For information on the startup
page, refer to “Printer Help Pages” on page 7-6.
Font upgrade
You can add an additional 52 fonts to the standard 17 fonts by upgrading to
the Extended Features configuration. Refer to “Extended Features upgrade”
on page 8-4 for more information. Refer to “Fonts” on page 3-41 for more
information on font typefaces.
600 x 300 dpi upgrade
You can upgrade the Phaser 350 printer to print with 600 x 300 dpi resolution
print quality by ordering the Z350FX upgrade. Refer to “Extended Features
upgrade” on page 8-4 for more information.
