Troubleshooting
6
User Manual
6-25
Check the printer’s language mode
If your file doesn’t print, the language on the printer’s port you are using
may have been changed.
Note
Monochrome PCL5 is optional and must be authorized before you
can use it; see the on-line manual on the printer’s CD-ROM for
instructions.
1. Print a copy of the printer’s configuration page to see the language
mode on each port. Refer to the on-line manual on the printer’s
CD-ROM for instructions on printing a configuration page.
2. If the printer port you are using has the wrong language set for the
type of application you are using, send one of the following utility
files to the printer:
■ To print PostScript files, use the PSCRIPT.PS file to set up a port to
receive PostScript. Refer to the on-line manual on the printer’s
CD-ROM for details.
■ To print HP-GL files, use the HPGL.PS file to set up a port to receive
HP-GL. Refer to the on-line manual on the printer’s CD-ROM for
details.
■ To print PostScript, or HP-GL, or Monochrome PCL5 files
interchangeably, use the AIS.PS file to set up a port for automatic
language selection. Refer to the on-line manual on the printer’s
CD-ROM for details.
