2
Getting Set Up
2-42
Phaser 350 Color Printer
■ Select one of the Header options. The Header contains important
PostScript information that must accompany each print job; it is not
a banner page printed with each job. If the Header is not used, your
job does not print. Click one of the following options:
■ Check the Send Header with Each Job box to download
PostScript header information with each print job.
Or:
■ Click the Send Header button to save the PostScript header
information in the printer. This option makes print files a little
smaller and faster than the first option, but you need to click the
Send Header button every time the printer is turned on
or reset.
9.
From the Options dialog box, click the Advanced button to see the
Advanced Options dialog box. Make sure the Use PostScript
Level 2 Features check box is checked on.
Note
The Use PostScript Level 2 Features option affects the print
time of bitmapped (raster) images by improving the image
transfer time from the computer to the printer, and by improving
the image processing time in the printer. This option is only
available to applications that use this Tektronix driver with
Tektronix PostScript Level 2 printers, such as the Phaser 350.
When this box is checked, the Compress Bitmaps option is
unavailable (grayed out).
10.
Click OK to return to the Options dialog box.
11.
In the Options dialog box, click the Printer Features button to see
the Tektronix Printer Features dialog box. Make color correction,
print quality, and other selections as desired. Click OK to return
to the Options dialog box.
12.
Continue clicking OK to return to the Printers dialog box, then
click Close.
