2
Getting Set Up
2-48
Phaser 350 Color Printer
Setting up a PostScript driver for Windows NT 3.51
This update procedure provides printer page size information for
Windows NT 3.51 applications. However, TekColor color corrections and
other PostScript Level 2 printer features are not supported by the
Windows NT 3.51 PostScript driver. Refer to the manuals that were shipped
with your printer for instructions on other ways of selecting color
corrections. Refer to your Microsoft Windows NT documentation for details
on features in the driver.
These instructions assume a basic familiarity with Windows NT operation
and terminology. For additional information about Windows NT, refer to
your Microsoft Windows NT documentation.
1.
Locate the Microsoft® Driver for Windows NT™ 3.51 and 4.0
(for i386) diskette that was shipped with your printer. Insert the
diskette into your computer’s disk drive.
2.
From the Main window, double-click on the Print Manager icon.
3.
From the Printer menu select Create Printer; the Create Printer
dialog box appears.
4.
Under Driver, scroll to the end of the list and select Other; the
Install Driver dialog box appears.
5.
When prompted, type in the path for the printer’s diskette.
6.
Under Printer Driver, select your printer from the list, then
click OK.
■ Select Tektronix Phaser 350 if you have the standard version of
the printer.
■ Select Tektronix Phaser 350 Extended if you have the printer's
Extended Features option.
Note
If you are not sure which configuration of the printer you have,
the printer’s startup page lists this information under Extended
Features: Yes/No. You can print a copy of the startup page from
the printer’s front panel.
