2
Getting Set Up
2-24
Phaser 350 Color Printer
SCSI peripheral devices
The SCSI port is used for connecting these optional peripheral devices:
■ Phaser Copystation
To set up the Phaser Copystation and to connect it to your printer,
refer to Chapter 2 of the Phaser Copystation User Manual. Refer to
“Phaser Copystation” on page 8-9 for ordering information.
■ External SCSI hard disk
■ Provides storage for additional downloadable fonts. You can
connect one or more SCSI external hard disks to the printer for
additional font storage. When you download a font to an external
disk, the font remains there until you remove it.
■ Allows for collation of print jobs on Phaser 350 printers with the
Extended Features option. Refer to “Using the Quick Collate
option” on page 4-12 for more information.
Refer to “Interface cables and adapters” on page 8-3 for information on
ordering SCSI cables.
Selecting a SCSI hard disk
■ For font storage. The Phaser 350 printer can use most SCSI hard
disks that support the full SCSI command set. Also, most SCSI hard
disks that work with an Apple LaserWriter will work with a
Phaser 350 printer. Contact your computer or printer dealer for
information.
■ For printer collation. To the use the collation feature available with
the printer’s Extended Features option, you’ll need to order a
1.2 Gigabyte external SCSI hard disk. This specific SCSI drive,
available from Tektronix, is required for use with the Phaser 350
printer. Refer to Chapter 8 for ordering information.
