System Configurations 3-11
MX2A137REFGD Revision A MX2 Reference Guide
System Configurations
Several configurations are possible for the system software on the unit,
depending upon the type of hardware that is to be supported. Two
standard configurations are described below, along with directory
structures and default CONFIG.SYS and AUTOEXEC.BAT file
descriptions.
Default Configuration
The configuration is created by DEFAULT.CFG in the Configuration
Utility. The data files will be stored on drive D. PC card drivers able to
support ATA cards will be loaded.
FILES = 30
REM --------------------------------
REM Phoenix Card and Socket
REM services for accessing PC Cards
REM --------------------------------
device = c:\pcm\cnfignam.exe /NORMAL
device = c:\pcm\pcmssit.exe
device = c:\pcm\pcmcs.exe
device = c:\pcm\pcmata.sys
Figure 3-7 CONFIG.SYS File on Drive C for Default Configuration
