Disk Drives and Files 3-9
MX2A137REFGD Revision A MX2 Reference Guide
(FAT) and will optionally fix errors.
DELTREE.EXE Deletes a directory and all it’s subdirectories.
MORE.COM Displays 25 lines of output at a time.
XCOPY.COM Send or receive data using a COM port.
PCM Directory Files
CNFIGNAM.EXE Specifies which PCM Plus configuration
parameters are to be used, based on the
selected boot configuration.
PCM.INI Defines system resource requirements for all
boot configurations which contain PCM Plus.
When a boot configuration is specified,
CNFIGNAM identifies the selection as
CONFIG.SYS is loaded and requests the
relevant configuration information from the
PCM.INI file.
PCMATA.SYS Device driver enables the system to access
ATA-configured PC cards as IDE hard drive
devices using an IDE partition table.
PCMCS.EXE Must be loaded directly after Socket Services.
Coordinates access to the PC cards and
allocates PC system resources among client
drivers.
PCMSS400.EXE PCM socket services are located in this driver.
The purpose of socket services is to provide a
layer of software support to the actual PC
hardware that controls PC-compatible sockets
for PC cards.
