Radio PC Card Configuration 2-23
MX2A137REFGD Revision A MX2 Reference Guide
10. If you want to include commands to be executed in the
AUTOEXEC.BAT
file, select the AUTOEXEC.BAT button. Enter
the commands, and save the revised file before exiting from the text
editor.
Note: Verify that the drive and directories of any drivers
loaded in the AUTOEXEC.BAT file are correct. The
default PX_IPX.CFG file assumes these drivers will
go to a specific location on the MX2. If you change
the destination directory on the MX2 for these files, be
sure to change them here, too. The file that you
selected as the main application will automatically be
appended to the AUTOEXEC.BAT file before it is
downloaded to the MX2.
11. If you want to make changes to the CONFIG.SYS
file, select the
CONFIG.SYS button.
Note: Certain default configuration parameters and card
and socket services drivers will automatically be
included at the beginning of the CONFIG.SYS file
before it is downloaded to the MX2.
12. Select the Done button in the File Configuration window to return
to the Custom Configuration menu.
13. Modify your program settings and communications settings, if
necessary.
14. Select the Download button in the Custom Configuration menu to
install the IPX/SPX protocol stack on the MX2.
15. Reboot the MX2 when the download is completed.
