2-34 Radio PC Card Configuration
MX2 Reference Guide Revision A MX2A137REFGD
Lucent Configuration Settings
Link Support Layer
Mempool 4096 : required for Novell LSL and TCP/IP
Buffers 8 1500 : required to avoid "Network jammed" message
Link Support
MEMPOOL 4096
BUFFERS 8 1500
TCPIP Protocol
Substitute the appropriate IP addresses in order for your network to
function properly.
Protocol TCPIP
IP_Address XXX.XXX.XXX.XXX
IP_Router XXX.XXX.XXX.XXX
IP_Netmask XXX.XXX.XXX.XXX
Install Lucent
WaveLAN II Drivers
Change the Lucent (LXE's System 6500) default radio parameters by
editing the NET.CFG file in the PCTCP directory. This can be done with
any ASCII text editor. The NET.CFG file is the configuration file used
by the radio card’s ODI driver. The NET.CFG file determines the
wireless network name, the workstation name and other information
regarding the wireless system.
LXE’s terminal emulation (TE) programs also allow you to change
System 6500 radio parameters using the TE Configuration Utility. Please
refer to the specific terminal emulation reference guide for instruction.
