A SERVICE OF

logo

The Single Dock 7-3
MX2A137REFGD Revision A MX2 Reference Guide
Attaching the Single Dock to a Computer
Complete the following steps:
1. Attach the 25-pin end of the cable to the cable connector on the
back of the Single Dock.
2. Attach the other end of the cable to a serial port on your computer.
3. If you ordered the optional power adapter, attach it to Power Input
Jack on the Single Dock .
Figure 7-2 Back Panel of the Single Dock
1 Power input jack
2 Cable connector
See Appendix A "Connector Configurations" for pin assignments.