A SERVICE OF

logo

Open as PDF
next previous
Default 4-9
MX2A137REFGD Revision A MX2 Reference Guide
Default
Select this option to load the original factory configuration into your
MX2. The configuration utility prepares files to be transferred to the
MX2 and opens a dialog box titled “Important.” Check the file lists in
both sections of the dialog box to see if they are correct and complete. If
you need to add, delete, or rename files, select from the dialog box.
Then use the selection in the main menu to build your own lists.
Figure 4-2 Example - The Important Dialog Box
If the file lists in the dialog box are correct, make sure your MX2 is
properly connected to the serial port specified in the Comm Settings
dialog box (default is COM 1 at 9600 baud). Then run the LD.BAT file
on the MX2, and select OK in the “Important” dialog box on the
computer.