Radio PC Card Configuration 2-35
MX2A137REFGD Revision A MX2 Reference Guide
NET.CFG File and
Parameters
Note: Alphabetic parameter values must be in uppercase.
An example NET.CFG file:
Link Driver WVLAN43
FRAME ETHERNET_II
WaveLAN_Network_Name ANY
Station_Name station_name
AP_Density 3
Transmit_Rate 3
PortType 1
Medium_Reservation 2347
Card_Power_Management = N
Maximum_Sleep_Duration = 100
Receive_All_Multicasts = Y
The following is a list of parameters that can be modified in the
NET.CFG file. For additional information about the parameters in this
file see the WVLAN43.CFG file located in the PCTCP directory.
WaveLAN_Network_Name
Identifies the WaveLAN network the station will connect to.
Valid values: 0 to 32 string of printable uppercase
characters.
Default: ANY
Note: Setting this value to ANY will enable the station to connect to
any IEEE 802.11 network.
Note: The string for WaveLAN_Network_Name is case-sensitive.
The Lucent DOS ODI driver requires the use of only
UPPERCASE characters. If you have configured the Lucent
Access Points with lower-case names you will need to change
your Lucent Access Point WaveLAN_Network_Name
parameter to UPPERCASE characters for proper operation.
Station_Name
Identifies the stations on the network. This parameter is used when
performing diagnostic tests.
Valid values: 0 to 32 string of printable characters.
Default: station_name
