2-32 Radio PC Card Configuration
MX2 Reference Guide Revision A MX2A137REFGD
Keyword Description
0xD400, 0xD800, and 0xDC00 are available for the
RF driver. The Proxim driver requires 0x4000 bytes
(16 KB) for the memory address.
Domain Sets the network domain. It can be any number from
0 through 15 and must match the domain of the
server or access point to which you want to connect.
Station_type Sets the status of the RangeLAN2 PC card as a
master (2), alternate master (1), or nonmaster (0)
station.
Frame Ethernet_802.3
(ODI only)
Indicates that the RangeLAN2 PC card sends
Ethernet packets that follow the 802.3 specification.
Socket Sets the PCMCIA socket ( A, B, C, or D) that has the
PC card installed. The MX2 always uses socket A for
PC cards.
Initialize_365 Determines whether to initialize the Intel 82365SL
PCMCIA controller chip. Because the MX2 does not
contain that chip, this parameter must be set to N.
Inactivity_min Sets the number of minutes of inactivity before the
PC card goes to sleep. Valid settings are 0 through
20. To maximize battery life, set this to 0.
Inactivity_sec Sets the number of seconds of inactivity before the
PC card goes to sleep. Valid settings are 0 through
55 (values above 5 are rounded to the nearest
multiple of 5). To maximize battery life, set this as
low as possible, preferably to 1.
Channel Sets the channel to be used when the RangeLAN2 PC
card is acting as the master. Valid settings are 1
through 15.
Subchannel Sets the subchannel to be used when the RangeLAN2
PC card is acting as the master. Valid settings are 1
through 15.
Master_name Sets the name of the RangeLAN2 PC card when it is
acting as the master. The name may be up to 11
characters and must not contain an
s
aces. The
