A SERVICE OF

logo

2-18 Radio PC Card Configuration
MX2 Reference Guide Revision A MX2A137REFGD
These applications allow the user to run Novell client/server
applications; to mount drives, printers, and other hardware; and
to treat the MX2 RF as if it were a client on a Novell network.
For other IPX/SPX solutions, the package provides software
from Novell. Novell’s IPX/SPX stack runs on top of the ODI
driver.
For other software implementations, you can customize one of
the provided configurations.
ODI with TCP/IP
Complete the following steps to install the ODI drivers for TCP/IP:
1. Start the Configuration Utility by double-clicking on the icon in the
Configuration Utility group on your PC.
2. From the Main Menu, select the Custom button.
3. An Open dialog box will appear (see screen displays in Chapter 4).
Select the PX_TCPIP.CFG configuration file. In the next Open
dialog box, select a program settings file. (If you do not have a
specific one that you want to use, select DEFAULT.PRS.)
The following files are included automatically as part of the
NetWare Client download:
LSL.COM
- Link support layer driver
NET.CFG - ODI configuration file
RL2PCM.COM
- Proxim RF ODI Driver
TCPIP.EXE
- TCP/IP protocol driver
You need to select your MX2 application and related files.
4. Select the File Configuration button in the Custom Configuration
menu.
5. Select the Add button, and use the File Selection dialog box (see
screen displays in Chapter 4) to include the main application and
additional files in your custom installation. Be sure to turn on the
Main Application switch for the one you want the MX2 to use.
6. Select the Next button at the bottom of the File Configuration
window.
7. In the second File Configuration window, make sure the Vendor
Specific option is selected. This option identifies which Phoenix
drivers to download.