MX2A137REFGD Revision A MX2 Reference Guide
Chapter 2
Using Advanced Features
Introduction
This chapter provides information about advanced features of the MX2
computers. It does not cover basics, such as use of the keypad and
display. For basic information about the MX2, see the “MX2 Installation
and Operator’s Guide.”
Programming the Enter Keys
Figure 2-1 Location of the Enter Keys
The MX2 allows reprogramming of one of the Enter keys. One Enter
key may be reprogrammed from a list of available keys. There is no
option for swapping the function of the Enter keys. However, if one key
is reprogrammed, the other key automatically becomes the Enter key.
To program an Enter key
First, hold down the [ALT] key then the [FN] key and press the desired
[Enter] key to reprogram. The program-trigger icon should appear on the
right in the display, indicating which Enter key is to be reprogrammed.
Left Enter Key Right Enter Key
Figure 2-2 Program Trigger Icons
