Radio PC Card Configuration 2-19
MX2A137REFGD Revision A MX2 Reference Guide
Note: The I/O-card drivers are not compatible with
Proxim’s client driver. Do not select the I/O Cards
options when using RF.
8. Select the More button to verify that the DOS files you need are
included in the download. After viewing the file list and making any
necessary changes, return to the File Configuration window.
9. Select the NEXT button to move to the third File Configuration
window.
10. If you want to include commands to be executed in the
AUTOEXEC.BAT
file, select the AUTOEXEC.BAT button. Enter
the commands, and save the revised file before exiting from the text
editor.
Note: Verify that the drive and directories of any drivers
loaded in the AUTOEXEC.BAT file are correct. The
default PX_TCPIP.CFG file assumes these drivers
will go to a specific location on the MX2. If you
change the destination directory on the MX2 for these
files, be sure to change them here, too. The file that
you selected as the main application will
automatically be appended to the AUTOEXEC.BAT
file before it is downloaded to the MX2.
11. If you want to make changes to the CONFIG.SYS
file, select the
CONFIG.SYS button.
Note: Certain default configuration parameters and card
and socket services drivers will automatically be
included at the beginning of the CONFIG.SYS file
before it is downloaded to the MX2.
12. Select the Text File button and open the NET.CFG
file in the
...\RF\PROXIM
directory.
13. Under the heading Protocol TCPIP, replace the Xs with the
appropriate IP address, IP router, and IP netmask numbers.
14. Save the NET.CFG
file before exiting from the text editor.
15. Select the Done button in the File Configuration window to return
to the Custom Configuration menu.
16. Modify your program settings and communications settings, if
necessary.
17. Select the Download button in the Custom Configuration menu to
install the custom TCP/IP configuration on the MX2.
18. Reboot the MX2 when the download is completed.
