Filter
Top Products
Multi Mode
MOTIF-RACK XS Owner’s Manual
97
Basic Structure
Voice
MultiUtility
Reference
The Controls &
Connectors
Setting Up
Listening to
the Sound
Connections
Using a Computer
Quick Guide
Appendix
Mid Q (Middle Q) This varies the signal level at the “Freq” (Frequency)
setting to create various frequency curve
characteristics. The higher the setting the smaller the
Q (Bandwidth). The lower the setting, the greater the
Q (Bandwidth). This parameter can be changed
directly via the Knob.
Settings: 0.7 – 10.3
7 Rcv Sw (Receive Switch)
From this display you can set how each individual Part responds to various MIDI data, such as Control Change messages. When the
relevant parameter is set to “on,” the corresponding Part responds to the appropriate MIDI data. Each of the Controller names in this display
indicates the MIDI data generated by using the corresponding Controller.
n For Parts to which the Drum Voice is assigned, Sustain is not available.
n When the Bank Select Sw/Prg Change Sw is set to “off” in the Utility MIDI window, Bank Select/Program Change here is not available.
n If “Control Change” here is set to “off,” Control Change related parameters are not available.
Settings: off, on
8 Fx Send (Effect Send)
Chorus Send Determines the Send level of the selected Part signal sent to the Chorus effect. The higher the value,
the more pronounced the Chorus. This parameter can be changed directly via the Knob.
Settings: 0 – 127
Reverb Send Determines the Send level of the selected Part signal sent to the Reverb effect. The higher the value,
the more pronounced the Reverb. This parameter can be changed directly via the Knob.
Settings: 0 – 127
Dry Level Determines the level of the selected Part which has not been processed with the System Effects
(Reverb, Chorus).
Settings: 0 – 127
Ins Effect Sw
(Insertion Effect Switch)
Determines the Parts available for the Insertion Effect. When this switch is set to on, the Insertion
Effect of the Voice assigned to the Part is enabled. Make sure that this parameter is set to on for any
Parts/Voices to which you need to apply Insertion Effects. The MOTIF-RACK XS features eight
Insertion effect systems, letting you set this parameter to on for up to eight Parts. If eight Parts are
already turned on, the parameter cannot be turned on for additional Parts.
Settings: off, on
–
+
0
“Freq”
Frequency
0.7
10.3