Filter
Top Products
Front Panel
MOTIF-RACK XS Owner’s Manual
11
Basic Structure
Voice
MultiUtility
Reference
The Controls &
Connectors
Setting Up
Listening to
the Sound
Connections
Using a Computer
Quick Guide
Appendix
) [VOICE] button
Use this button to enter the Voice mode (pages 27 and 64).
Pressing this button calls up the Voice Play display (page
27); this enters the Voice mode and turns the lamp on. In the
Voice mode, this button’s lamp flashes when MIDI messages
are received from an external MIDI device or computer.
! [EFFECT] button
Pressing this button calls up the Effect dialog (page 34).
Holding this button for two seconds or more calls up the
Effect display in the current mode.
n When you select the Voice/Multi that is set the Insertion Effect, System
Effect (Reverb, Chorus), and Master Effect to on, this button’s lamp will
light.
@ [EDIT] button
Pressing this button calls up the Edit Select display in the
Voice mode/Multi mode.
# [MULTI] button
Use this button to enter the Multi mode (pages 35 and 91).
Pressing this button calls up the Multi Play display (page 35);
this enters the Multi mode and turns the lamp on. In the Multi
mode, this button’s lamp flashes when MIDI messages are
received from an external MIDI device or computer.
$ [SELECT] button
Pressing this button changes the functions assigned to the
five knobs. The lamp next to the currently active parameters
will light (page 30). When the “Knob Sel Disp Sw” parameter
(page 99) is set to “on” in the General display of the Utility
mode, pressing this button calls up the Knob Select pop-up
window (page 29).
% [UTILITY] button
Use this button to call up the Utility parameters. Pressing this
button calls up the Utility Select window (page 98) for the
relevant Utility parameters of the currently selected mode.
^ Knobs 1 – 5 (page 29)
These five highly versatile knobs let you adjust various
parameters such as Voice or Multi settings and Arpeggio
tempo. Pressing or turning any of the knobs calls up the
Knob pop-up window (page 29), according to the setting of
the “Knob Disp Time” parameter (page 99) in the General
window of the Utility mode.
Functions performed by operating two controllers
[EDIT] and [UTILITY]
Pressing the [EDIT] and [UTILITY] buttons simultaneously enters
the Demo mode (page 15).
[VOICE] and [STORE]
In the Voice mode, pressing the [STORE] button while holding
the [VOICE] button transmits the bulk data of the current Voice to
the external MIDI device.
[MULTI] and [STORE]
In the Multi mode, pressing the [STORE] button while holding the
[MULTI] button transmits the bulk data of the current Multi
settings to the external MIDI device.
[MULTI] and [ENTER]
In the Multi mode, pressing the [ENTER] button while holding the
[MULTI] button initializes all settings for the selected Multi.
[UTILITY] and Encoder knob
Turning the Encoder knob while holding the [UTILITY] adjusts the
LCD for optimum legibility (page 99).