Filter
Top Products
MOTIF-RACK XS Owner’s Manual
13
Basic Structure
Voice
MultiUtility
Reference
The Controls &
Connectors
Setting Up
Listening to
the Sound
Connections
Using a Computer
Quick Guide
Appendix
Setting Up
Connect the supplied AC power adapter in the following order.
Before you connect the power adaptor, make sure that the
[VOLUME] knob is set to STANDBY (Off).
1.
Connect one end of the AC cable to the power
adaptor.
2.
Connect the plug of the power adaptor to the DC
IN terminal on the rear panel of the MOTIF-RACK
XS.
3.
Plug in the AC cable to an appropriate AC outlet.
n Follow this procedure in reverse order when disconnecting the power
adaptor.
Use the specified adaptor (or an equivalent recommended by
Yamaha). Using the wrong adaptor can result in damage to the
instrument or overheating.
Make sure your MOTIF-RACK XS is rated for the AC voltage
supplied in the area in which it is to be used (as listed on the
rear panel). Connecting the unit to the wrong AC supply can
cause serious damage to the internal circuitry and may even
pose a shock hazard!
Even when the [VOLUME] knob is in the “STANDBY” position,
electricity is still flowing to the instrument at the minimum level.
When not using the MOTIF-RACK XS for an extended period of
time, be sure to unplug the AC power adaptor from the wall AC
outlet.
Wrap the DC output cable of the adaptor around the cable clip
(as shown above) to prevent accidental unplugging of the cable
during operation. Avoid tightening the cord more than
necessary or pulling on the cord strongly while it is wrapped
around the cable clip to prevent wear on the cord or possible
breakage of the clip.
Since the MOTIF-RACK XS has no built-in speakers, you’ll need
an external audio system or a set of stereo headphones to
properly monitor it. Connect a set of headphones, powered
speakers, or other playback equipment as illustrated below.
When making connections, be sure that your cables have the
appropriate ratings.
A pair of powered speakers can accurately produce the
instrument’s rich sounds with their own pan and effect settings.
Connect your powered speakers to the OUTPUT L/MONO and R
jacks on the rear panel.
n When using just one powered speaker, connect it to the OUTPUT L/MONO
jack on the rear panel.
Power Supply
1
2
Power adaptor
Rear Panel
DC IN
To electrical outlet
AC cable
WARNING
CAUTION
CAUTION
Cable Clip
Using Headphones or
Speakers
MOTIF-RACK XS
PHONES
OUTPUT L/MONO OUTPUT R
Powered speaker
(Left)
Headphones
Powered speaker
(Right)