Filter
Top Products
Troubleshooting
MOTIF-RACK XS Owner’s Manual
111
Basic Structure
Voice
MultiUtility
Reference
The Controls &
Connectors
Setting Up
Listening to
the Sound
Connections
Using a Computer
Quick Guide
Appendix
Cannot call up the Play display and the dialog.
●
This situation occurs when the instrument is in the
Compare mode. Press the [EDIT] button to exit from the
Compare mode to enable you to perform the operation.
Data communication between the computer and the
MOTIF-RACK XS does not work properly.
●
Check whether the Port setting on the computer is
appropriate or not....................................pages 18 and 20
●
Is the “MIDI IN/OUT”” setting appropriate?
[UTILITY]
→
select “MIDI”
→
“MIDI In/Out”
If the MIDI IN/OUT terminals are used, set this parameter to “MIDI.” If the
USB terminal is used, set this parameter to “USB.” If the mLAN terminal
(only when the optional mLAN16E2 has been installed) is used, set this
parameter to “mLAN.” ..................................................................... page 99
Data communication between the MIDI instrument
and the MOTIF-RACK XS does not work properly.
●
Is the “MIDI In/Out” setting to “MIDI”?
[UTILITY]
→
select “MIDI”
→
“MIDI In/Out”=”MIDI”........................ page 99
The MOTIF-RACK XS does not sound properly even
when playing back the song data on the computer
or the MIDI instrument connected to the MOTIF-
RACK XS
●
Is the MOTIF-RACK XS set to the Multi mode?
The Voice mode may not produce the proper sound even
when playing back the Song data on the MIDI instrument
or the computer connected to the MOTIF-RACK XS.
Likewise, setting the “Layer 1 – 4 Parts” parameter to “on”
may not produce the proper sound even when the MOTIF-
RACK XS is in the Multi mode. ..............................page 98
Cannot receive bulk data.
●
Is the Device Number setting correct?
If the data was saved with the Bulk Dump function of the
MOTIF-RACK XS, you need to set the Device Number to
the same number before Bulk Dump transmission.
[UTILITY]
→
select “MIDI”
→
[ENTER]
→
“Device No.” ................ page 100
●
Is the MIDI IN/OUT setting appropriate?
[UTILITY]
→
select “MIDI”
→
[ENTER]
→
“MIDI In/Out”................. page 99
●
Has the Receive Bulk Switch parameter been set to
“protect”?
[UTILITY]
→
select “MIDI”
→
[ENTER]
→
“Receive Bulk”............. page 100
●
Are any of the MIDI cables damaged?
n For information about the problems when the optional mLAN16E2 has
been installed and the computer is connected to the MOTIF-RACK XS via a
mLAN cable, refer to the manual of the Driver you are using.
n For information on problems with use of the MOTIF-RACK XS Editor,
accessory DAW software and USB-MIDI Driver, refer to the Manual or
Installation Guide of the relevant software.