Filter
Top Products
Greensmaster eFlex 1800/2100Traction and Reel Drive System Page 3 -- 4
Disengaging Drum Drive From Transmission
The traction drum is driven by a multi--ribbed belt that is
tensioned with a spring loaded idler assembly. To disen-
gage the traction drum drive from the transmission, fol-
low the following procedure:
1. Parkmachineon level surface. Turnkeyswitch to the
OFF position and remove key from the switch. Discon-
nect the battery pack (see Battery Pack Connection in
this section).
2. Locate the traction engage/disengage lever next to
the RH drive housing d rum (Fig. 2).
CAUTION
Be careful whenrotating t he traction engage/dis -
engage lever. The lever is spring loaded and may
cause personal injury. Push lever from the front
when removing belt tension to prevent unex-
pected movement of the lever.
3. Rotate traction engage/disengage lever toward the
rear of the machine to the disengaged position to re-
move tension from the drum drive belt.
4. To engage the drum drive, rotate traction engage/
disengage lever to the engaged position by rotating the
lever toward the front of the machine.
5. Connectthe battery pack(see Battery Pack Connec-
tion in this section).
1. Traction lever (engaged) 2. RH handle clamp
Figure 2
2
1