Filter
Top Products
M300EU OPERATING INSTRUCTIONS M300EU
Addendum to M300E/EM Manual P/N 04288
ANALOG OUTPUT SIGNAL TYPE AND RANGE SELECTION
The information found in Section 6.13.5.2 of the M300E/EM Operators Manual (P/N 04288) is applicable
to the M300EU with the following exception(s):
• There are minor differences in the displays ( e.g. CONC_OUT_2 instead of DATA_OUT_2) User
Notes:
TURNING THE ANALOG OUTPUT OVER-RANGE FEATURE ON/OFF
The information found in Section 6.13.5.3 of the M300E/EM Operators Manual (P/N 04288) is applicable
to the M300EU with the following exception(s):
• There are minor differences in the displays ( e.g. CONC_OUT_2 instead of DATA_OUT_2) User
Notes:
ADDING A RECORDER OFFSET TO AN ANALOG OUTPUT
The information found in Section 6.13.5.4 of the M300E/EM Operators Manual (P/N 04288) is applicable
to the M300EU with the following exception(s):
• There are minor differences in the displays ( e.g. CONC_OUT_2 instead of DATA_OUT_2) User
Notes:
NOT APPLICABLE SECTIONS
The following sections of the M300E/EM Operators Manual (P/N 04288) relating to configuration of the analog
outputs DO NOT apply to the M300EU.
• 6.13.5.6 REPORTING GAS CONCENTRATIONS VIA THE M300E/EM ANALOG OUTPUT CHANNELS
• 6.13.5.7 SETTING THE REPORTING RANGE SCALE FOR AN ANALOG OUTPUT
• 6.13.5.8 SETTING DATA UPDATE RATE FOR AN ANALOG OUTPUT
• 6.13.5.9 TURNING AN ANALOG OUTPUT ON OR OFF
36 05831 Rev. 01