Filter
Top Products
Chapter 9. Basic functions
z
Note that setting Frequency Ref. for Accel/decel (H70) is set to Max Freq and target freq is set below
Max freq. the shape of S-curve may be distorted.
Accel/decel Ref Freq (H70)
Target Freq
H17
H18 H18
H17
Freq
Note: If set target freq is
below Max freq, the
curve will not be shown
completely.
z Accel/Decel Disable
Group LED display Parameter name
Set
value
Min/Max
range
Factory
defaults
Unit
I20
[Multi-function input
terminal P1 define]
- 0
~ ~
I/O group
I24
[Multi-function input
terminal P5 define]
24
0/24
4
Select one terminal of I20-24 to define Accel/Decel disable.
For example, if P5 is selected, set I24 to 24 to activate this function.
ON
Freq.
P5
Run
command
ON
ON
74