Filter
Top Products
Chapter 5. Programming keypad
5.6 Monitoring of operation status
Monitoring output current in Drive group
Drive group
1
-. In [0.0], continue pressing the Up (S) or Down (T) key until [Cur] is displayed.
2
-. Monitoring output current is provided in this parameter.
-. Press the Prog/Ent (z) key once to check the current.
3
-. Present output current is 5.0 A.
-. Press the Prog/Ent (z) key once to return to the parameter name.
4
-. Return to the output current monitoring code.
♣ Other parameters in Drive group such as dCL (Inverter DC link current) or vOL (Inverter output
voltage) can be monitored via the same method.
34