Filter
Top Products
SAFETY INSTRUCTIONS
Always follow safety instructions to prevent accidents and potential hazards from occurring.
In this manual, safety messages are classified as follows:
WARNING
Improper operation may result in serious personal injury or death.
Improper operation may result in personal injury or property
damage.
CAUTION
Throughout this manual we use the following two illustrations to make you aware of safety considerations:
Identifies potential hazards under certain conditions.
Read the message and follow the instructions carefully.
Identifies shock hazards under certain conditions.
Particular attention should be directed because dangerous voltage may be present.
Keep operating instructions handy for quick reference.
Read this manual carefully to maximize the performance of C series inverter and ensure its safe use.
WARNING
Do not remove the cover while power is applied or the unit is in operation.
Otherwise, electric shock could occur.
Do not run the inverter with the front cover removed.
Otherwise, you may get an electric shock due to high voltage terminals or charged capacitor
exposure.
Wait at least 10 minutes after disconnecting the input power prior to wiring
and periodic inspection practices. Measure the DC link voltage with a meter
to verify complete discharge (below DC 30V).
Otherwise, you may get an electric shock.
Do not touch the drive with wet hands.
Otherwise, you may get an electric shock.
Do not use the cables with damaged insulation or the shield.
Otherwise, you may get an electric shock.
Do not subject the cables to scratches, excessive stress, heavy loads or
pinching.
Otherwise, you may get an electric shock.
5
2