Filter
Top Products
Chapter 1. Basic information & precautions
1.3 Removal and reinstallation
1.3.1 Removal of the front cover
z To change parameter setting: Press the pattern with a finger slightly as 1) and
push it downward as 2). Then 4-way button will appear. Use this button for
parameter setting and changing the value.
1)
2)
1. Press here gently
Side slot
4-Way Button
2. Push it down
z Removal for wiring: The method is the same as shown in 1. Hold both sides of the
cover and lift upward to completely remove from the main body.
Parallel!
2. Hold both
sides of this
part
3. Lift it up to
remove.
2)
1. Push down the
cover until cover
top matches the
side slot.
1)
11