Filter
Top Products
Chapter 9. Basic functions
z Restart after fault reset
Group LED display Parameter name
Set
value
Min/Max
range
Factory
defaults
Unit
Drive
group
Drv
[Drive mode]
(Run/Stop mode)
1, 2
0/3 1
Function
group 2
H21 [Restart after fault reset] 1
0/1 0
Set H21 to 1.
Motor starts acceleration if drv is set to 1 or 2 and the selected terminal is ON when a fault is
cleared.
This function is inactive when the drv is set to 0 {Run via the Keypad}.
CAUTION
Particular attention must be directed to this function due to potential hazard as motor
starts to run suddenly after the fault is cleared.
Run
command
Reset
Frequency
When H21 is 0 When H21 is 1
69