Land Pride rcf3696 Brush Cutter User Manual


 
47
Section 5: Maintenance & Lubrication
12/15/15
RCF3696, RCFM3696, RCF3610, & RCFM3610 Rotary Cutters 326-600M
Table of Contents
Skid Shoe Replacement
Figure 5-7
Skid Shoe Maintenance
Refer to Figure 5-7:
!
WARNING
Excessive wear on skid shoes can damage side panels, cause
inadequate operation of cutter, and create a safety hazard.
Always replace skid shoes at the first sign of wearing thin.
A skid shoe is mounted to each side of the cutter. Check
both skid shoes for wear and replace if needed. Order
only genuine Land Pride parts from your local Land Pride
dealer.
1. Remove 3/8" hex whiz nuts (#3), 3/8" plow bolts (#2)
and skid shoe (#1) as shown.
2. Plow bolts should be checked for wear and replaced
if necessary.
3. Attach new skid shoe (#1) to cutter with existing
3/8" plow bolts (#2) and secure with 3/8" hex whiz
nuts. Torque to 31 ft. lbs.
4. Repeat on opposite side.
33963
Land Pride Skid Shoe Replacement Parts
Part No.Part Description
326-479D SKID SHOE
802-603C PLOW 3/8" - 16 x 1" GR5
803-198C NUT HEX WHIZ 3/8-16 PLT
Tire Maintenance
!
WARNING
Tire changing can be dangerous and should be performed by
trained personnel using correct tools and equipment. When
removing and installing wheels, use wheel handling
equipment adequate for the weight involved.
!
WARNING
Always release all air pressure in air-filled airplane tires
before removing hardware bolting their split rims together.
Not doing so can cause the split rims to blow apart instantly
and could result in serious injury or death.
!
WARNING
When inflating tires, use a clip-on chuck and extension hose
long enough to allow you to stand to one side and NOT in front
of or over the tire assembly. Use a safety cage if available. Do
not overinflate tires.
!
WARNING
Do not weld on or heat a rim. If a tire is mounted to the rim,
air pressure inside the tire can increase enough to cause an
explosion. High heat can also weaken and/or warp the rim,
damage the tire, and destroy foam filling inside a tire.
Air Filled Airplane Tires with split Rims
Figure 5-8
1. Check tires for low air pressure, missing nuts,
missing lug bolts, wear, separated rubber, and bent,
broken, or cracked wheel rims.
2. Inflate air filled tires to the proper pressure. Refer to
“Tire Inflation Chart” on page 56.
Refer to Figure 5-8:
3. Replace wheel rims and tires as needed with
genuine Land Pride parts. Do not loosen split rim
hardware (#1) until all air pressure in the tire has
been removed.
33925
1