Filter
Top Products
30
Section 2: Assembly of Optional Equipment
RCF3696, RCFM3696, RCF3610, & RCFM3610 Rotary Cutters 326-600M
12/15/15
Table of Contents
Check Chains (Accessory)
For 3-Point & Semi-Mount Cutters
(Available through Land Pride parts department.)
Refer to Figure 2-5:
Check chains are used to control the cutting height and
allow the mower to be lowered to the same preset cutting
height effortlessly. Install lower end of check chain (#1) to
the inner hitch ear as shown in Figure 2-5, using the
3/4"-10 x 1 1/2 long bolts (#2), lock washers (#3) and nuts
(#4). Tighten securely. Install chain lugs (#5) on either
side of the tractor top link mount using pin (not supplied).
Cutting height is then set by placing proper chain link in
key slot (#5).
Check Chain Assembly
Figure 2-5
NOTE: For additional safety in transport, raise
cutter as high as possible, and shorten check chains
to prevent inadvertent falling in transport.
16264