Filter
Top Products
9
Introduction
12/15/15
RCF3696, RCFM3696, RCF3610, & RCFM3610 Rotary Cutters 326-600M
Table of Contents
Introduction
Owner Assistance
The Online Warranty Registration should be completed
by the dealer at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your Rotary Cutter have been specially
designed by Land Pride and should only be replaced with
genuine Land Pride parts. Contact a Land Pride dealer if
customer service or repair parts are required. Your Land
Pride dealer has trained personnel, repair parts, and
equipment needed to service the implement.
Serial Number
Model No. _____________Serial No. ______________
For quick reference and prompt service, record model
number and serial number in the spaces provided above
and again on warranty page 57. Always provide model
number and serial number when ordering parts and in all
correspondences with your Land Pride dealer. Refer to
Figure 1 for location of your serial number plate.
Serial Number Plate Location
Figure 1
Further Assistance
Your dealer wants you to be satisfied with your new
Rotary Cutter. If for any reason you do not understand
any part of this manual or are not satisfied with the
service received, the following actions are suggested:
1. Discuss the matter with your dealership service
manager making sure that person is aware of any
problems you may have and has had the opportunity
to assist you.
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
problem, and request assistance.
3. For further assistance write to:
Land Pride Service Department
1525 East North Street
P.O. Box 5060
Salina, Ks. 67402-5060
E-mail address
lpservicedept@landpride.com
IMPORTANT: A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
33938
Land Pride welcomes you to the growing family of new
product owners.
This Rotary Cutter has been designed with care and built
by skilled workers using quality materials. Proper
assembly, maintenance, and safe operating practices will
help you get years of satisfactory use from this machine.
Application
The heavy duty RCF(M)3696 and RCF(M)3610 Series
Rotary Cutters are designed and built by Land Pride to
provide excellent cutting performance on gently sloping
or slightly contoured right-of-ways, pastures, set-aside-
acres, or row crop fields. Their 8 or 10 foot cutting width,
2" to 12" cutting height, and ability to cut weeds and
brush up to 3" in diameter make them well suited for
these applications. They offer Quick Hitch adaptability
with either 540 RPM or 1000 RPM PTO capability.
The RCF(M)3696 cutters are designed for Category
l or ll 3-point and semi-mount hitches or pull-type
attachment. The 3-point hitch requires a 50 - 130 HP
tractor, semi-mount hitch requires a 40 to 130 HP tractor,
and pull-type set-up requires a 35 - 130 HP tractor.
The RCF(M)3610 cutters are designed for Category
ll or lll 3-point and semi-mount hitches or pull-type
attachment. The 3-point hitch requires a 60 - 130 HP
tractor while semi-mount and pull-type hitches require a
50 - 130 HP tractors.
Heavy-duty stump jumpers, main driveline clutches, and
outboard flex couplers are offered for driveline and
gearbox protection. Safety guards around the cutter are
offered in either single chain, double chain, or rubber.
See “Specifications & Capacities” on page 52 and
“Features & Benefits” on page 54 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
the operator with safety, assembly, operation,
adjustments, troubleshooting, and maintenance. Read
this manual and follow the recommendations to help
ensure safe and efficient operation.
• The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
• To order a new Operator’s or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com
Terminology
“Right” or “Left” as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.
Definitions
NOTE: A special point of information that the
operator should be aware of before continuing.