Filter
Top Products
5 - 24
92B/96B/99B/105B
Users Manual
Examining the ScopeRecord™
To examine a ScopeRecord, do the following:
1. From the Min Max Record menu press
(EXAMINE). See Figure 5-16.
The following menu appears:
Figure 5-17. Examine menu
2. Use to scroll horizontally through the
ScopeRecord. The box above the and keys
(zoom box) moves in the corresponding direction to
indicate the ScopeRecord location currently displayed.
3. Use (ZOOM in) and (ZOOM out) to
increase and decrease the time resolution.
increases the time resolution. The zoom box above
and becomes smaller to indicate that a
smaller, but more detailed part of the ScopeRecord is
displayed.
decreases the time resolution. The zoom box
becomes larger to indicate that a larger, but less
detailed part of the ScopeRecord is displayed.
4. To measure the waveform with cursors, press to
set CURSORS on. To change cursor settings, press
(MORE) to open the setup menu. Refer to
Chapter 6 for additional information about the use of
cursors.