Filter
Top Products
6 - 14 92B/96B/99B/105B Users Manual
USING A PRINTER
Connecting to a Printer
Use the Optically Isolated RS-232 Adapter/Cable
(PM9080/001) to connect a printer to the OPTICAL INTER-
FACE connection of the ScopeMeter test tool. See
Figure 6-7.
CAUTION
Ensure that the printer is turned off during installation.
This prevents damage to the printer.
Figure 6-7. PM9080/001 Hookup
NOTE
The following instructions relate to actions you must take at
the test tool end of this operation.
Setting Print Parameters
Press and then to open the Printer window.
You can now choose the printer settings and type of
information to print.
Figure 6-8. Printer Window
Tip: Use
to highlight PRINTER BAUDRATE
and press to read more about printer settings.
Selecting Printer Types
The test tool can print directly to an FX/LQ (Epson),
deskjet, or laserjet printer at 1200 or 9600 baud. From the
list box, make these printer type selections.
Selecting Print Options
You can choose from the following print options: Screen,
Readings, or Waveforms.
92B