Fluke 99B Telescope User Manual


 
5 - 6
92B/96B/99B/105B
Users Manual
ADJUSTING THE TIME BASE
Press to increase or decrease the number of
periods. The time base readout is on the second row of the
top display. Refer to Figure 5-3. Available settings depend
on the acquisition mode in effect, and are as follows:
Recurrent 5ns (10ns)/DIV - 1s/DIV
*
Single 100ns/DIV - 1s/DIV
Roll 2s/DIV - 60s/DIV
*
Fluke 92B and 96B : 10ns/DIV
Fluke 99B and 105B : 5ns/DIV
The time base can be changed in increments of 1, 2, and 5
(e.g., 10 ns, 20 ns, 50 ns).
Figure 5-3. Time Base and Amplitude Adjustment