Fluke 99B Telescope User Manual


 
Introducing The ScopeMeter Test Tool 1 - 13
USING ON-LINE INFORMATION
You can get information about functions at any time by
pressing . The short descriptions will help you under-
stand how the test tool functions.
When you operate the ScopeMeter test tool, the display
provides information about the present condition or
explains procedures taking place and asks for confirmation.
These messages are always displayed in a box.
More information is available by pressing . This
displays one or more pages of extended on-line information.
More information is available under the following conditions:
- In a menu (F1 to F5) you always can get information on
the functions for every function key.
- In a window you can get more information about the
highlighted function when the icon is displayed.
- In a message you can get more information about the
conflict with the present setup when the icon is dis-
played. If necessary, the test tool asks for confirmation
and disables the conflicting situation.
Figure 1-8 hows an example of a "function info" screen.
You can set the information level for on-line information to
high or low. This is explained in Chapter 6.
Figure 1-8. Using On-Line Information
When you have read the displayed information, press
to exit the information mode.
This returns the test tool to the latest setup before you
pressed , and you can continue your measurement.