Filter
Top Products
107
TECHNICAL STANDARDS APPLIED
The standards applied in order to comply with the essential requirements of the Directives 73/23/CEE
"Electrical material intended to be used with certain limits of voltage" and 89/336/CEE "Electromagnetic
Compatibility" are the following ones:
• EN 50178 (1997)
“Safety of information technology equipment”.
• EN 50081-1 (1992)
“Electromagnetic compatibility. Generic emission standard. Part 1:
Residential, commercial and light industry.”
• EN 55022 (1994)
“Limits and methods of measurements of radio interference
characteristics of information technology equipment.”
• EN 50082-1 (1997)
“Electromagnetic compatibility. Generic immunity standard. Part 1:
Residential, commercial and light industry.”
• EN 61000-4-2 (1995)
“Electromagnetic compatibility (EMC). Part 4: Testing and
measurement techniques. Section 2: Electrostatic discharge immunity
test. Basic EMC Publication (IEC 1000-4-2: 1995).”
• ENV 50140 (1993)
“Electromagnetic compatibility - Basic immunity standard - Radiated
radio- frequency electro magnetic field - Immunity test.”
• ENV 50204 (1995)
“Radio electromagnetic field from digital radio telephones.”
• EN 61000-4-4: 1995
“Electromagnetic compatibility (EMC). Part 4: Testing and
measurement techniques. Section 4: Electrical fast transients / burst
immunity test. Basic EMC Publication (IEC 1000-4-4: 1995).”
• EN 61000-4-5: 1995
“Electromagnetic compatibility (EMC). Part 4: Testing and
measurement techniques. Section 5: Surge immunity test. Basic EMC
Publication (IEC 1000-4-5: 1995).”
• ENV 50141 (1993)
“Electromagnetic compatibility. Basic immunity standard. Conducted
disturbances induced by radio-frequency fields.”
• EN 61000-4-8: 1993
“Electromagnetic compatibility (EMC). Part 4: Testing and
measurement techniques. Section 8: Power frequency magnetic field
immunity test - Basic EMC Publication (IEC 1000-4-8: 1993).”
• EN 61000-4-11: 1994
“Electromagnetic compatibility (EMC). Part 4: Testing and
measurement techniques. Section 11: Voltage dips, short interruptions
and voltage variations immunity tests (IEC 1000-4-11: 1994).”