Filter
Top Products
SPECIFICATIONS
4
Specifications
#75003 Pool Pilot Digital Control unit
Input Power
230 Vac 1.5 amps (Normal input configuration shipped from the factory)
115 Vac 3 amps (Optional input configuration – jumper wire to convert included)
Dry Contact 5 mA typical Non-factory ORP input circuit (110Vac output require a Relay Kit – PN# 110-ORP)
Chlorine Output
SuperCell Type Maximum Chlorine Output (# 75003 Control unit set on Cell Power 3)
SC-36 1.28 lbs/day (0.58 kg/day)
SC-48 1.56 lbs/day (0.71 kg/day)
SC-60 1.92 lbs/day (0.88 kg/day)
CC-15 2.50 lbs/day (1 .14 kg/day) – Com mercial Cell
Manifold Flow Requirements
Minimum Flow Rate 20 gallons per minute (gpm) (76 liters/minute (L/m))
Maximum Flow Rate 100 gallons per minute (gpm) (379 liters/minute (L/m))
Maximum Pressure 85 psi (as tested by NSF)
Pump/Auxiliary Relay Output
Voltage Input Amps / HP max
115 Vac 30 amps / 1 HP
230 Vac 30 amps / 2.5 HP
Agency Approvals
• ETL tested to conform to the following UL specifications:
o UL1081 - Standard for Safety for Swimming Pool Pumps, Filters and Chlorinators
o UL 1563 - Standard for Safety for Electric Spas, Equipment Assemblies, and Associated Equipment.
• CAN/CSA-E335-1 - Safety of Household and Similar Electrical Appliances
#75001 Pool Pilot Pool Chemistry Control unit
pH Acid Feed Pump and Tank AC Input Power
#75004 120 Vac 1.7 amps
#75005 220 Vac 0.9 amps
#75006 230 Vac 0.9 amps
#75007 250 Vac 0.9 amps
#75008 Auxiliary Relay Kit 1 15 / 230 Vac Relay 30 amps max
Low Voltage Input Power
PCC Comm uni cati on Factory Low Volt a ge Int erface Cable provided with #75 00 1
#75008 pH Auxiliary Relay Kit (Optional) Dedicated Factory Low Voltage Terminal
Flow Cell
Flow Sensor Fail – Safe status
Maximum working pressure 50 psi