Using Key Operator Settings
175
9
With a programmed password
A Enter a password using the
number keys, and then press
[OK].
Note
r If you make a mistake, press
[Clear] or the {Clear/Stop} key.
F Press [Delete].
Note
r To cancel deleting a box, press
[Do not Delete]. The display re-
turns to that of step
E
.
G Press [Exit].
H Press the {User Tools/Counter} key.
The standby display appears.
Programming/changing Information
Boxes
This section describes how to set up
an Information Box.
You can store the following items:
•Box name (required)
Up to 20 characters long
• SEP Code (required)
Up to 20 characters long and can be
composed of digits 0-9, “#”, “*”,
and spaces (the first character can-
not be a space).
• Password (optional)
Up to 20 characters long and can be
composed of digits 0-9, “#”, “*”,
and spaces (the first character can-
not be a space).
Note
r When programming a pass-
word, a mark is displayed be-
fore the Box name.
Note
r You can edit boxes in the same
way you program them. However,
to change the SEP Code itself, you
must delete the box, and then pro-
gram a new SEP Code.
Reference
p.42 “Information Boxes”
A Press the {User Tools/Counter} key.
B Press [Facsimile Features].
C Press [Key Operator Tools].
D Press [Box Setting].
E Select the box to program.
When programming a new box,
press [*Not Programed].
