User Tools (System Settings)
102
4
Programming/Changing LDAP Server
Programming an LDAP server allows
you to look up e-mail destinations
from the LDAP server Address Book
directly. This function is available
when you send scan files by e-mail
using scanner function.
Note
r Select [ON] in the Use LDAP Server
setting to use this function. See
p.66 “Use LDAP Server”.
r This function supports LDAP Ver-
sion 2 and 3.
r To ensure successful searching,
make sure the server name and
port number are entered correctly.
For details, ask your network ad-
ministrator.
Programming an LDAP Server
A Press the {User Tools/Counter} key.
B Press [System Settings].
C Press [Key Operator Tools], and then
press [TNext] twice.
D Press [Program/Change LDAP Server].
E Enter the items.
To enter an identification name
A Press [Change] under Identifi-
cation Name.
B Enter the server's identifica-
tion name.
C Press [OK].
To enter a server name
A Press [Change] under Server
Name.
B Enter the LDAP server name.
C Press [OK].
To enter the search base
A Press [Change] under Search
Base.
B Enter the search base.
Note
r For example, if you enter
“ou=sales department,
o=ABC”, searching will start
below the sales department
level of ABC company (here,
“ou” stands for organization
unit, and “o” stands for com-
pany).
C Press [OK].
ZCAS100E
