Using Key Operator Settings
173
9
r
If the fax number or e-mail address
of a programmed receiver is delet-
ed using System Settings, the set-
ting for the receiver is cancelled
and a message is not delivered. If
the fax number or e-mail address of
a programmed receiver is changed,
a message is delivered to the new
fax number.
Reference
p.40 “Personal Boxes”
A Press the {User Tools/Counter} key.
B Press [Facsimile Features].
C Press [Key Operator Tools].
D Press [Box Setting].
E Select a box to program.
When programming a new box,
press [*Not Programed].
Note
r To change a box already pro-
grammed, press it and proceed
to step
H
.
F Press [Personal Box].
G Enter a box name, and then press
[OK].
Reference
“Entering Text”, General Set-
tings Guide
H Enter a SUB Code.
Note
r
To change the SUB Code, press
[
Clear
]
or the
{
Clear/Stop
}
key, and
then try again. To change a Box
name, press
[
Box Name
]
, and then
repeat the procedure from step
G
.
I
Specify the settings you require.
If you do not want to program a pass-
word or receiver, proceed to step
J
.
Programming a password
A Press [Password].
B Enter a password, and then
press [OK].
Note
r If you make a mistake, press
[Clear] or the {Clear/Stop} key
before pressing [OK], and
then try again.
