80 Control Panel Options
VX7 Reference Guide E-EQ-VX7RG-D
Administrator Control
Access: Start | Settings | Control Panel | PC Connection
Use this option to set parameters for computers intended to be used as dedicated, single
application devices. In other words, only the application or feature specified in the AppLock
configuration by the Administrator is available to the user.
LXE devices with the AppLock feature are shipped to boot in Administration mode with no
default password, thus when the device is first booted, the user has full access to the device and no
password prompt is displayed. After the administrator specifies an application to lock, a password
is assigned and the device is rebooted or the hotkey is pressed, the device switches to end-user
mode.
AppLock also contains a component which sets configuration parameters as specified by the
Administrator.
To set the AppLock parameters, please see Chapter 6, “AppLock” for details.
Certificates
Access: Start | Settings | Control Panel | Certificates
Manage digital certificates used for secure communication.
Lists the Stored certificates trusted by the VX7 user. These values may change based on the type
of radio security resident in the client, access point or the host system.
