Configuring CapsLock Behavior 121
E-EQ-VX7RG-D VX7 Reference Guide
Configuring CapsLock Behavior
S
The CapsLock behavior can only be changed on VX7’s with software revision
1ED or greater. For more information on identifying the software version of your
VX7, please see “Identifying your VX7” in Chapter 2, “Physical Description and
Layout”.
To set CapsLock status to On after a warmboot, run \Windows\CapsLockOn.reg and perform a
warmboot.
To set CapsLock status to Off after a warmboot, run \Windows\CapsLockOff.reg and perform a
warmboot.
Note: Setting CapsLock to On using this method does not display the CapsLock icon in the
Windows CE taskbar,
Note: The current status of CapsLock can be changed with the CapsLock key (95-key
keyboard) or the CAPS key (60—key keyboard), however this method does not change
CapsLock behavior upon reboot.
Note: These utilities affect the behavior of the CapsLock on warmboot. After a coldboot,
CapsLock is disabled.
Configuring IPv6
S
The ability to disable IPv6 is only present on VX7’s with software revision 1ED or
greater. For more information on identifying the software version of your VX7,
please see “Identifying your VX7” in Chapter 2, “Physical Description and
Layout”.
By default, IPv6 is enabled and an IPv6 broadcast message is sent on power up.
To disable IPv6, run \Windows\ipv6Disable.reg and perform a warmboot.
To enable IPv6, run \Windows\ipv6Enable.reg and perform a warmboot.
Note: These utilities affect the behavior of IPv6 on warmboot. After a coldboot, IPv6 is
enabled.
