LXE E-EQ-VX7RG-D Manual

A SERVICE OF

next previous

Summit Radio 143

E-EQ-VX7RG-D VX7 Reference Guide

WPA PSK

To connect using WPA/PSK, make sure the following profile options are used:

• Enter the SSID of the Access Point assigned to this profile

• Set EAP Type to None

• Set Encryption to WPA PSK

• Set Auth Type to Open

Figure 5-19 WPA/PSK Encryption

Click WEP/PSK Keys button.

Figure 5-20 PSK Entry

This value can be 64 hex characters or an 8 to 63 byte ASCII value. Enter the key and click OK.

Once configured, click the Commit button. Ensure the correct Active Config is selected on the

Main tab and warmboot. The SCU Main tab shows the device is associated after the radio

connects to the network.