Control Panel Options 93
E-EQ-VX7RG-D VX7 Reference Guide
Scanner
Access: Start | Settings | Control Panel | Scanner
Set scanner keyboard wedge, scanner icon appearance, active scanner port, and scan key settings.
Assign baud rate, parity, stop bits and data bits for available COM ports.
Factory Default Settings
Main
Port 1 COM1
Port 2 Disabled
Power Port 1 while asleep N/A
Send key messages WEDGE Enabled
On Delay Ms 3000
COM Ports COM1 COM3
2
Baud Rate 9600 9600
Parity None None
Stop Bits 1 1
Data Bits 8 8
Power on Pin 9 On Off
Advanced
Strip Leading Disabled, 0 Characters
Strip Trailing Disabled, 0 Characters
Prefix Disabled
Suffix Disabled
Note: ActiveSync will not work over a COM port if that COM port is assigned to Port 1 or Port
2 in the Scanner applet as a scanner input. For example, if COM1 is being used by the
scanner, COM1 can’t be used by any other program.
S
Scanner control panel options may vary with software revision level. To identify
the software revision, please click on the “About” icon in the CE .NET Control
Panel.
2
The COM3 port is labeled “COM2/3”.
