128 Summit Radio
VX7 Reference Guide E-EQ-VX7RG-D
Client Name
A string of up to 16 characters – Name assigned to the radio and the device using the radio. The
client name may be passed to networking radio devices, e.g. Access Points.
Default: Blank
Power Save
Power save mode.
Options: CAM = Constantly Awake Mode, power save off
Default: CAM
Tx Power
Desired transmit power.
Options: Maximum = Max power for current regulatory domain
50, 30, 10 or 1 mW
Default: Maximum
Bit Rate
Options: Auto = Rate negotiated automatically with the AP
1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48 or 54 Mbit
Default: Auto
Radio Mode
Specify 802.11g and/or 802.11b when communicating with AP.
Options: B rates only
B + G rates
Default: B + G rates
Auth Type
802.11 authentication type used when associating with AP
Options: Open
Shared key
LEAP
Default: Open
Note: Set the Auth Type radio parameter is set to “Open” for all configurations unless using
LEAP (not WPA) and the AP is configured for network EAP only. In this case, set the
Auth Type radio parameter to “LEAP”.
