64 Fuse
VX7 Reference Guide E-EQ-VX7RG-D
Fuse
The VX7 uses a 100V, 10A time delay (slow blow), high current interrupting rating fuse that is
externally accessible and user replaceable. Should it need replacement, replace with same size,
rating and type of fuse – Littlefuse 0234010 or Optifuse MSC-10A (5x20mm).
3
2
1
T10A, 125V
INPUT:
12-80VDC
6A 72W
AUDIO
ETHERNET /
USB
THIS DEVICE COM PLIES WITH PART 15 OF THE FC C RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND ( 2) THIS DEVICE MUST ACCEP T ANY
INTERFERENCE R ECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED O PERATION.
This Class A digital apparatus complies with
Canadian ICE-003.
Cet appareil num de la Classe A est
confirme l
érique
orme NMB-003 du Canadaà n
CAUTION: For continues protection against risk of fire,
replace only with same type and rating of fuse.
ATTENTION: Pour ne pas compromette la preotection
contre les risques d'incendie, remplacer par un fusible
de mmes types de mmes caractristques nominales.êêé
TENT 586239 3
1. Fuse
2. Twist in this
direction to
remove
3. Twist in this
direction to insert
Figure 3-6 Fuse Replacement
Caution:
!
Fuse has voltage on it even when power is off. Always disconnect input power
before changing fuse.
