Start Menu Program Options 71
E-EQ-VX7RG-D VX7 Reference Guide
Connect
Connect is used to initiate a hardwired connection to a host. Several pre-defined connect setups
are included in the factory setup:
• COM1 direct connect at 57600 or 115200 baud
• COM3
1
direct connect at 57600 or 115200 baud
• USB direct connect
The default connection is USB direct connect.
After a connect setup is selected, Start | Programs | Communication | Connect will start to
connect to a host. After this connection is made and an ActiveSync relationship established, the
ActiveSync menu item can be used to establish the connection over the radio link.
See Also: “Important Information – Cold Boot and Loss of Host Re-connection”
Start FTP Server / Stop FTP Server
These shortcuts call the Services Manager to start and stop the FTP server. The server defaults to
Off (for security) unless it is explicitly turned on from the menu.
1
The COM3 port is labeled “COM2/3”.
